Apr 12, 2010 - If you cannot get your cutter working, check that you've followed these steps carefully. 1) Turn your cutter off, and plug it into a free USB port on.

Bully scholarship edition chapter 4 save game. Forums: Index Bully General Chat Help early chapter 4 (savegame) hello! I'm totally stuck with the first mission of chapter 4, in which you have to get into the. Feb 18, 2018 - Bully v20170608 6 trainer bully v20161228 4 trainer bully v12 9 bully savegame chapter iv 36 bully v10 7 trainer bully v10 8. I need a save. Apr 4, 2018 - Bully Scholarship Edition Cover System Language Protection CD Cover, PC Bully SAVEGAME CHAPTER IV 36 Bully v10 7 TRAINER Bully. Dec 31, 2017 - Bully Scholarship Edition Save Game Chapter 4 Download. Market data provided. ETF and Mutual Fund data provided by, Inc.

Foison C-24 Vinyl Cutter Setup instructions. SignTools Settings. If you are connecting your cutter via a USB connection you must install the USB driver that came with your cutter first. This will create a an extra Com or USB port that you can select in the SignTools 'Device Setup' dialog box. China Vinyl Cutter (C24), Find details about China Vinyl Cutter, Cutting Plotter from Vinyl Cutter (C24) - Dali Jingdiao Co., Limited.

Asset 12 Folson Vinyl Cutter

Risks

• Keep hair/loose clothing clear of the rollers
• Check for signs of damage to the case or frayed cables

Uses

The vinyl cutter is used to cut self-adhesive designs of various patterns (typically text and logos) to be stuck on to a workpiece. For more advanced usage it could also be used to make stencils for chemical processes or paint.

• Signs
• Iron on T-Shirts
• Stencils for etching or paint

Preparing the design

Prepare the design in Inkscape.

• Set the document properties to units of mm (milimetres) - this will avoid confusion!
• Draw the design actual size. Obviously fill and colour don't matter, it only cuts outlines.
• If the design includes text, use the 'Path -> Object to path' option in Inkscape to make paths. This applies also to any other object which is not a path.
• Ungroup everything before cutting (Inkcut doesn't like groups)
• Orientation - the cutter will cut ALONG the roll by default. This is not usually what you want for small pieces (width < 500mm). So rotate it 90 deg. If creating a very large design (e.g. 500mm high text), then leave the design 'the right way up'.
• Once everything is drawn and made into ungrouped paths, use the Inkcut extension.

Setting up the machine

• Turn it on
• Ensure connected
• Loading vinyl - make sure that the feed clamps are clamped in appropriate places. (Feed in vinyl from the back)
• Setting cut pressure - this is the parameter 'p=' shown on the cutter screen. Set it so it cuts through the vinyl but not the backing. Use 'test' button to check.
• Setting the origin - set the origin to the buttom RIGHT corner of the working area, not the bottom left!
  • Offline the cutter
  • Position the cutter head using the arrow buttons (Do not try to move manually)
  • When in correct position, press the 'zero' button
  • Put cutter back online

To test the machine, the 'test' button cuts a small rectangle. You can use this to check (e.g. on newly loaded stock) that it's cutting through the vinyl cleanly

• Connection via USB in Linux, means the device is probably /dev/ttyUSB0.
• Make sure that the serial baud rate is set to the same on the PC in Inkcut, as on the front panel menu. (see Tech Details below)
• Ensure you have read/write permissions to /dev/ttyUSB0, this can be done by running sudo chmod 777 /dev/ttyUSB0

Applying vinyl to workpiece

There is a roll of 'transfer film' which is 'sticky but not too sticky' somewhere.

• Prepare (clean, dry, lay out etc) the workpiece.
• Cut the vinyl to size with scissors etc.
  • You can 'weed' out the unwanted pieces at this stage, or manually remove them from the workpiece afterwards.
• Cleanly stick the transfer film to the top of the vinyl.
• The tricky part - now remove the backing from the vinyl, you should be left with the self-adhesive stuck to the transfer film.
• Stick the vinyl to your workpiece!
• Enjoy!

Tech details

Windows (USB Tested and working with Inkscape)

• Forget about Inkcut plugin, Inkscape will cut directly.
• Install drivers from http://www.microcontrols.org/arduino-uno-clone-ch340-ch341-chipset-usb-drivers/ (These work in Win10)
• Alt driver location https://github.com/HobbyComponents/CH340-Drivers
• Turn the printer on, ''then'' plug usb in
• Find Com# in device manager
• In Inkscape
  • rotate your text to correct orientation, path>objects to path, right click and ungroup
  • Click Extensions>Export>Plot..
    • Set com# and baud 38400, when printer is zero'd and online then click apply and it should start cutting.

Linux (untested)

The cutter shows up as a standard USB<->RS-232 converter cable, and talks HP-GL.

The best software for printing (From Linux at least) is [http://inkcut.sourceforge.net/ InkCut] an InkScape extension. Simple convert stroke to paths, select what you want, and Extensions->Cutter / Plotter->InkCut. Click the 'Properties' top-right to set the correct serial port (probably /dev/ttyUSB0) and speed (defaults to 38400, but you can set it via the menu button and LCD on the cutter).

Old info (Ignore this and use USB, it works with above instructions)

There are two physical interfaces on the cutter;

• RS-232This requires a standards compliant serial interface. Alcazar disco defenders download. Most USB-Serial adapters are 5v whereas the Foison requires one operating at 12v minimum

• USBWindows requires the 'CH341SER' driver to be installed. After much coaxing, unplugging and plugging in, a Windows Vista laptop found and installed the driver which then appears as a COM port. This can be driven programmatically using Python and the PySerial package but we have yet to find a printer setup that will recognise and drive this interface.

This Python snippet worked for the Cutter's USB interface set up in Windows as COM 7;

Advertisement Ijazah sarjana muda separuh masa uthm.

Summary of Contents for Foison C12

• Page 1 C SERIES USER’S MANUAL C12/24/48 CUTTING PLOTTER All Rights Reserved to Foison Technology Ltd.

• Page 2: Table Of Contents

  C SERIES USER’S MANUAL Preface Preface Chapter One Standard Parts 1.1 Standard Accessories with Cutter………………………………………………………….5 1.1.2 C48 Sketch for Vertical Stands Installation………………………………………….…6 1.2 Optional Accessories……………………………………………………………………..…6 1.2.1 Software……………………………………………………………………………………6 1.2.2 C24 Stand Installation Sketch………………………………………………………..….7 Chapter Two Safety Precaution 2.1 Safety Precaution…………………………………………………………………………..8 Chapter 3 Features Product Parameters……………………………………………………………………………11 Chapter Four Parts Name and Function 4.1 Front View C-24 ……………………………………………………………………….12..
• Page 3 C SERIES USER’S MANUAL 6.4.3 Speed and Knife Force Setting…………………………………………….……………23 6.4.4 Knife drop/raise Test……………………………………………………………….24 6.4.5 Test Rectangle Cutting Operation………………………………………………………25 6.4.6 Pause Button Operation…………………………………………………….………….26 6.4.7 Online-change Speed and Knife Force Operation…………………………………….27 6.4.8 Repeat Function………………………………………………………………..28 6.4.9 Port Setting………………………………………………………………...28 6.4.10 X, Y Scale Setting………………………………………………………………...29 Chapter Seven Print Output 7.1 ARTCUT Output Parameter and Port Setting……………………………….…………30 7.2 Compensation Setting……………………………………………………………….31..
• Page 4 In order to use the cutter correctly and safely, please read above relative contents, and leave the manual at where you can catch conveniently. Prior operating the FOISON cutter, please thoroughly read the manual, which will help you acquire performance of the machine and make best of its functions, please keep the manual well for future reference.

• Page 5: Chapter One Standard Parts

  C SERIES USER’S MANUAL Chapter One Standard Parts The following cutter standard accessories with the cutter can be available in a packing box. If you find any damaged, please contact with the local distributor or our company. The other following optional accessories should be ordered optionally. 1.1 Standard Accessories with Cutter Number Item..

• Page 6: C48 Sketch For Vertical Stands Installation

  C SERIES USER’S MANUAL 1.1.2 C48 Sketch for Vertical Stands Installation Only C48 is equipped with stand, the stands is optional for C24 1.2 Optional Accessories 1.2.1 Software Number Item Quality Icon Artcut Software Flexi Software PCSIGN Letter Software C48 Sketch for Vertical Stands Installation..

• Page 7: C24 Stand Installation Sketch

  C SERIES USER’S MANUAL 1.2.2 C24 Stand Installation Sketch Only C48 is equipped with stand, the stand is optional for C24 Introduction for the common used tool and its usage Icon Series Number Angle Application 45° C12/24/C48 60° C12/24/C48..

• Page 8: Chapter Two Safety Precaution

  C SERIES USER’S MANUAL Chapter Two Safety Precaution The following icons are used in the manual; aims to make sure the user operate the cutter properly to avoid damaged the cutter. Please comply with the explanation of the icon. 2.1 Safety Precaution Definition of Warning Symbols serious casualty : Any improper operation possibly results in hazard..
• Page 9 C SERIES USER’S MANUAL Do not touch the knife top with your finger to prevent injury or perspiration of knife head. Do not damage or random replace the supplied power cable. Do not excessively bend, pull, bundle the power cable or place weight on it, otherwise the power source may be damaged even fire or electric shock is thus incurred.
• Page 10 C SERIES USER’S MANUAL Warning Do not use the power source not meeting rating voltage, otherwise fire or electric shock may be resulted in. If the machine gives out smoke or unpleasing smell, or noise sounds please do not use it .in such cases, continuing using it may result in fire or electric shock.

• Page 11: Chapter 3 Features

  C SERIES USER’S MANUAL Chapter 3 Features Product Parameters Model C-12 C-24 C-48 structure desktop desktop /(optional Stands (with stands) stands) Accept media 415mm 720mm 1300mm width Max cutting width 305mm 610mm 1220mm Main board High speed Arithmetic Microprocessor, 1MB cache Interface RS232,USB Control penal..

• Page 12: Chapter Four Parts Name And Function

  C SERIES USER’S MANUAL Chapter Four Parts Name and Function 4.1 Front View C-24 Blade Control Base Left cabinet Right Panel Transmission Shaft Carriage Paperweight Wheel Serial Interface 4.2 Back View C-24 USB Interface Roller Power Switch Power Interface Front Back Sketch..

• Page 13: Control Panel

  C SERIES USER’S MANUAL 4.3 Control Panel 1 LCD LCD Display 2 Paper Feeding Button it is X direction button under offline; it is value“-”under parameter menu. 3 Original Setting Button: Press such button to fix the coordinate point under offline. Rightward Button it is Y direction button under offline;..

• Page 14: Chapter Five Cutter Installation

  C SERIES USER’S MANUAL Chapter Five Cutter Installation 5.1 Installation and Connection 5.1.1 Cutting Environment Place the cutter in adequate space in case to replace some parts, output the media and make sure ventilation. The place for installing the cutter shown as below Don’t install your cutter in the following place - The place where is direct sunlight - The place where is vibration..

• Page 15: Usb Driver Installation

  C SERIES USER’S MANUAL 5.1.3 USB Driver Installation For USB connection, you need to install the driver equipped with the cutter. Please install CH341SER.EX file under USB DRIVER in the disk equipped with the cutter. After installing successfully, connect the USB cable to computer USB port. Set the right port; please refer to the appendix for setting the port.

• Page 16: Tools Installation

  5.2.4 Raise two handles of paperweight wheel, to make paperweight wheel down to press paper 5.3 Tools Installation CAUTION Do not touch the knife top with your finger to preserve injury or passivetion of knife head. 5.3.1Tool Introduction and Application Icon Series Number Angle Application 45° C12/24/C48 60° C12/24/C48..

• Page 17: Plot Pen Installation

  C SERIES USER’S MANUAL 5.3.2 Adjust the protruding length of the knife top as required for specific cutting media Superficil material Base paper Correct Tool long protruding Tool short protruding Length of knife point length of knife point 5.3.3 (1) Loosen the screw of tool carrier (2)Assembly the tool with knife into the tool carrier (3)When the tool is in appropriate position screw it and fix the screw.

• Page 18: Chapter Six General Settings And Operation

  C SERIES USER’S MANUAL Chapter Six General Settings and Operation 6.1 Work Status Descriptions 6.1.1 Online/Offline When the cutter is switched on, it will reset and set to Online status. Press “ONLINE” to switch Online/Offline status. When the cutter transmits data to PC, the cutter must be in Online status.

• Page 19: Original Point Setting

  C SERIES USER’S MANUAL 6.1.3 Original Point Setting When the carriage needs to move to the original point, press “ ”, X and Y value will set to “0”. Then the new original point is set. The cutter will begin working at the new original point.

• Page 20: Bounded System

  C SERIES USER’S MANUAL 6.1.4 Bounded system The cutter adopts advance optical coupler bounded system. The following introduces how the optical coupler takes effect. Move the carriage to the left side of the cutter, if the cutter exceeds the work area, the optical coupler bounded system takes effect.

• Page 21: Offline Status Description

  C SERIES USER’S MANUAL Setting Mode Menu Definition Button Function Description Menu Menu Switch Press once and enter into Set Per menu Baud Rate Increase Press once and increase to a defined baud rate Baud Rate Decrease Press once and decrease to a defined baud rate Idle Speed Increase Press once the Idle Speed will increase by 50mm/s Idle Speed Decrease..

• Page 22: Menu Operation Description

  C SERIES USER’S MANUAL The left and right herein refer to the person stands in front of the cutter. The object is subject to the person’s direction. 6.4 Menu Operation Description 6.4.1 Power on Display Ver 120: The cutter program version is 120 The default value: Speed V=400mm, Knife Force f=200g.

• Page 23: Speed And Knife Force Setting

  C SERIES USER’S MANUAL 6.4.3 Speed and Knife Force Setting Speed and Knife Force Setting..

• Page 24: Knife Drop/raise Test

  C SERIES USER’S MANUAL 6.4.4 Knife drop/raise Test Press Repeat to test knife drop/raise. Press once is knife drop and press once again knife raise. Please refer to the media and examine the difference after changing the knife force. Hints: the difference effect can be seen after using normal knife force. Knife drop/raise Test..

• Page 25: Test Rectangle Cutting Operation

  Press Test, the cutter will begin test. The Test button is effective only when the cutter is Offline. When the cutter is working, the LCD will display Online. After it finishes working, the cuter will turn back to online status, i.e.: display Foison. Shown as followings: Test Rectangle Cutting Operation..

• Page 26: Pause Button Operation

  C SERIES USER’S MANUAL 6.4.6 Pause Button Operation Press Test for three seconds will realize self rectangle test cutting. Shown as following: Pause Button Operation..

• Page 27: Online-change Speed And Knife Force Operation

  C SERIES USER’S MANUAL 6.4.7 Online-change Speed and Knife Force Operation During the operation, we can adjust the speed and knife force when the cuter is working. The instructions show as following. Hints: The adjusted speed and knife force will be realized when the carriage finish cutting one point to another.

• Page 28: Repeat Function

  C SERIES USER’S MANUAL 6.4.8 Repeat Function Each time after finish working, switch the cutter into offline status and press Repeat. The cutter will repeat the job done last time. Hints: The main board load in flash memory, so it can not repeat the last job after the cutter switch on again.

• Page 29: X, Y Scale Setting

  C SERIES USER’S MANUAL 6.4.10 X, Y Scale Setting Press Menu once again and enter into Set Per setting. Xp and Yp refer to cutting scale. The purpose is to set the scale from PC and output file into 1:1 (If there’s any error between the actual output and the software setting, please adjust Xp and Yp.

• Page 30: Chapter Seven Print Output

  C SERIES USER’S MANUAL Chapter Seven Print Output When all parameters are well set, switch the cutter into online status. Install the necessary software. (C series cutter is compatible with standard HPGL, DMPL code. So it is compatible with many software, if you need to obtain the detailed list, please contact to our Technical Department.) In the software setting, please note that both baud rate and port setting shall be identical with the cutter.

• Page 31: Compensation Setting

  C SERIES USER’S MANUAL Click Setup, set Communication Port and Baud Rate on the dialogue Serial Port Setting. Shown as following: Hints: Please refer to Appendix to check out the way of COM and Baud Rate setting. 7.2 Compensation Setting When the cutter need to cut, the “Ploter Compensation”..
• Page 32 C SERIES USER’S MANUAL deform. The values shall is set according to plotter pen divided from the center. Most plotter can be 0.35. Note that if Sharp Anger is selected, the plotting time will be longer. The way is: set Close and Sharp Angle well in the “Ploter Compensation” option, shown as followings:..

• Page 33: Chapter Eight Troubleshooting

  C SERIES USER’S MANUAL Chapter Eight Troubleshooting 8.1 Question: Will the character below 1CM be deformed? Answer: when graving small characters, please set sharp-angle compensation in the software, for example, in ArtCut plotting software: 1 Click “Plotting Output” once, a plotting output will pop up. 2 Click “Set”..
• Page 34 4. If the problem is still in existence, please contact with repair center 8.10 Question: how do we maintain the cutter? Answer: Foison series cutter all employ upscale oil bearing from Japan, no oil is needed even it works for a long time.

• Page 35: Chapter Nine Appendix

  C SERIES USER’S MANUAL Chapter Nine Appendix Appendix 1 CorelDraw Output Open CorelDraw software, we can adjust the edit size according to the cutter’s working size. Shown as following: Next input characters on the edit size. It needs to change the input physical font into frame font. In that case the cutter can out put frame font.
• Page 36 C SERIES USER’S MANUAL Next remove the filling by using No Fill, shown as following: Then see the removed effect, shown as following: CorelDraw Output..
• Page 37 C SERIES USER’S MANUAL Select Print and set Print setting parameters, shown as following: Next preview the print output, shown as following: It can output now. Note that set well the communication port otherwise it is unable to output. CorelDraw Output..

• Page 38: Appendix 2 Coreldraw Software Output

  C SERIES USER’S MANUAL Appendix 2 CorelDraw Software Output ( ) Install CorelDraw, if such software has been installed in the PC, it needn’t to install. ( ) Install print driver. Use Roland CM-24 driver directly. Next will introduce how to install the driver.
• Page 39 C SERIES USER’S MANUAL But if it’s COM2, selects COM2. Click OK and enter next step, shown as following: Ignore Bit per second and Flow control options, they will be introduced latter. Click Close. The driver is well-installed. 2) Enter Printer and Faxes setting of the PC, shown as following: CorelDraw Software Output..
• Page 40 C SERIES USER’S MANUAL Set CM-24 as Default Printer. Click right button, choose Properties, will appear the following: CorelDraw Software Output..
• Page 41 C SERIES USER’S MANUAL Select the communication port that identical with cutter that connects to PC port. After selecting the port, click CONFIGURE PORT and set other parameters, shown as following: The Bits per second option is used to set baud rate. The baud rate MUST be the same in both software and cutter, otherwise it can not output.

• Page 42: Appendix 3 Port Setting And Replacement

  C SERIES USER’S MANUAL Appendix 3 Port Setting and Replacement After the USB driver is well-installed, switch on the cutter, the computer will indicate that new device was found and it will automatically install the driver for the cutter. Set the port parameter according to the following way: Select My Computer –..
• Page 43 C SERIES USER’S MANUAL 2) Select Port Settings options 3) Click Advanced and enter port selection, shown as followings, then click COM Port Number. Offline Status Description..
• Page 44 C SERIES USER’S MANUAL There are many ports selectable. Note that if the port is using, it will mark “In Use”. We can choose other ports that are not in use. After selecting the port, the USB port will set as the new selected port.